Finland 
Belgium 
Spain 
France 
Germany 
Iceland 
Latvia 
Netherlands 
Norway 
Poland 
Portugal 
Switzerland 
Sweden 
Ukraine 
United Kingdom 
Estonia 
Slovakia 
Lithuania 
USA & Canada 
Brazil 
Australia 
New Zealand 
South Africa
Charging alternatives for electric loaders
Choose the right charging method for your electric Avant loader depending on how and when you use the loader.
First, consider where the loader will operate and how quickly you need to charge it. The standard equipment supports slower charging, while fast charging requires optional equipment. For lighter use, the loader’s on-board 3 kW charger is sufficient. For demanding professional applications, however, we recommend rapid charging, either with the optional on-board 9 kW charger or with Avant’s DC rapid charging station.
Onboard charging
Charging with standard equipment, 3 kW
As standard, Avant electric loaders are equipped with an internal 3 kW charger and a 1-phase Schuko <–> Type 2 charging cable (230 V) that lets you charge your loader with 3 kW power.
Charging with optional charger, 9 kW
With an optional 9 kW onboard charger (product number: A475136) you can charge your loader about three times faster than with a standard 3 kW charger. The charging power and speed is practically the same as that of Avant’s 400 V / 16 A rapid charging station. To reach the maximum charging capacity of the 9 kW on-board charger, you need one of the following max 9 kW charging options.
Onboard charging cables
Max 3 kW
Schuko <–> Type 2 charging cable (max. 16 A / 320 V standard socket)
Standard equipment.
Product number: A464571
Max 9 kW
3-phase CEE <–> Type 2 charging cable (16 A / 400V socket)
An easily movable option.
Product number: A464547
Max 9 kW
Wallbox wall charging station and Type 2 charging cable (fixed)
The charging station is installed by an electrician.
Product number: A464548
Max 9 kW
3-phase Type 2 <–> Type 2 charging cable
This cable allows you to charge the loader at all Type 2 charging stations.
Product number: A464549
Charging with Avant’s DC rapid charging station
A good alternative for demanding professional use and rapid charging during a workday. Requires an optional rapid charging inlet on the loader (product number: A464123).
Two models are available: The 400 V / 16 A rapid charging station, and the more powerful 400 V / 32 A model that charges your Avant e500 and e700 series loaders in just over an hour in optimum conditions.
The DC rapid charging station has two fixed cables. One is connected to the loader and the other to a 3-phase socket (either 16 A or 32 A, depending on the power of the rapid charging station).
A426117 Rapid Charging Station, 400 V / 16 A
A425411 Rapid Charging Station, 400 V / 32 A
You can find the charging times for electric loaders on the e series loaders’ pages.