Groundcare

S30 CUTTING BAR

There are two models of cutting bars which mount on the side arms with S30 quick attach system (both on the mechanical & hydraulic side arm). They cannot be mounted on the attachment coupling plate of the loader. The A430938 cutting bar is equipped with the same cutting blades and blade guides as the A35676 cutting bar. The frame and actuator mechanism are however stronger, which means the A430938 bar is optimized for hedge cutting and doesn’t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.

The A434613 cutting bar with double knifes is a more precise hedge cutter and makes a cleaner cut thanks to the double knife design which cuts the branches by sawing them.

The mounting bracket of the cutting bars is pivoted and locked with a bolt, and can be turned manually in different positions. This gives the possibility to for instance cut the hedge horizontally, vertically and in different angles.The cutting bars are also equipped with a pressure relief valve wich protects the unit if it hits an obstacle.

• Efficient and quick hedge cutter also for higher hedges
• Cutting both horizontally and vertically thanks to pivoting mounting bracket
• Two models
• Multi connector on hydraulic hoses available as an option, for mounting on the S30 side arms (side arm must also be equipped with multi connector)

TECHNICAL INFORMATION

The optional Opticontrol® is required on the loader.

Option:

A443003 Multi connector (3 connectors) + holder